PhysProps for Windows 9X/NT/ME/2000/XP/Vista/Windows 7 v1.6.1
Copyright (C) 1999-2013, G&P Engineering Software.
All rights reserved.

Contact Information:
===================

Postal:       G&P Engineering Software
	   3209 Coral Ridge Drive
                 League City, TX     77573

Email:        inquiry_request@gpengineeringsoft.com

Internet:     http://www.gpengineeringsoft.com

Software Terms:
==============

PhysProps is distributed as 14-day TRIALWARE.  You may evaluate this
software free of charge for not more than 14 days.  At the end of
14 days you must register the software in order to continue using it.
Before using this software, please read the disclaimer and license
agreement in the file DISCLAIMER.TXT.

To register the software after the 14-day trial period, see the file
REGISTER.TXT.

Installation Notes (Windows 9X/NT/ME/2000/XP/Windows 7):
=============================================

1. Use Explorer to create a new (temporary) folder on your hard drive. Since
   it is temporary, the name is not important. Use "TEMP" if you like.

2. Move the zipped distribution file (PHYSPROPS.ZIP) into the new directory.

3. Unzip the distribution file using WinZip.

4. Windows NT/2000/XP users:  Login with "Administrator" priveleges. 

5. From the Task Bar select: Start, Run, Browse...

6. Locate your new directory ("TEMP"). Click on "setup.exe" and click the "Open" button.

7. Click "OK" and follow the prompts. (You may get a "Destination file in use"
   message during the setup procedure. This is not a problem. Just hit "OK").
   Feel free to change the installation path.

8. During installation, you may get a "Windows needs to reboot to update system files
   to continue installation" message.  This is not a problem.  Reboot your computer
   and start the installation process again beginning at step #5.

9. Run PhysProps using the Task Bar: Start, Programs, PhysProps... or set-up a short-cut
   on the desktop by right-clicking on the windows desktop:
   New, Shortcut,... and following the prompts.

Note: Once installation is complete, you can use Explorer to delete the
      temporary folder on your harddrive.  None of the files are required to run
      the program.

Computer Requirements:
=====================

PhysProps has the following minimum computer hardware requirments:
·  80486 x 66 MHz Processor (for optimum performance, a 200 MHz processor should be used).
·  32 MB physical (RAM) memory.
·  11 MB hard drive disk space.
·  Monitor capable of at least 800 x 600 pixel resolution.

Disclaimer and License:
======================

Please be sure to read the DISCLAIMER.TXT file which contains disclaimer statements and
the license agreement you are agreeing to each time PhysProps is used.